1)：Please match the product first:Turn on the remote control power switch first,Press remote control to hold the vibration key.,Then install the receiver battery,(Batteries are included in the factory packaging:Remote control is:9VHigh capacity battery,The package has been installed,The receiver is:AAA 1.5VOrdinary alkaline battery)Lights on both sides.Please wait until the receiver starts to vibrate and let it vibrate.5More than seconds.Release the remote control vibration key.At this point, the microcomputer of the receiver has accepted and saved the signal from the remote control.,Other remote controls have no effect on it..If not,Please try again.(Please operate at the time of purchase)

2)Please cover the battery cover of the receiver(Because it involves product waterproof,Be sure to pack the battery cover flat),The barbed side faces outward.,The top of the Thorn is conducting resin,Direct contact with dog's skin.Fixed and adjusted nylon ribbon collar,It should not be too loose or too tight to wear,Elastic so that two fingers can be inserted.

3)Remote button function description:

The upper left is the discharge key.:This key is direct discharge;Practical for special emergencies(Such, your dog will hurt people, etc.)

The bottom left is the vibration key.:This key is used when your dog is not obedient or barking,Shake its vocal cords,Make it feel uncomfortable,When the vibration is invalid for a long time,It will automatically turn into discharge penalty.

The upper right is the luminous key.:The function of this key is to emit relatively bright white light.,Use it when it is inconvenient,(Such:Take the Night Road or find your pet when the light is dark.).

The lower right is the sound key.:This key is set for your dog training,You can set it as you like..And the sound can be adjusted,The adjustment switch is below the right side..(Such:Pressing it twice loudly means eating,What is the meaning of pressing it again and again in a low voice?,You can set your own training)

The upper right side is the remote control switch.,All the above operations must first turn on this switch..

4)Method for testing whether to discharge:Discharge of this product,Please remember not to directly contact human skin test.We have a gift when packingLEDTest lamp,Fix two lamp legs on two discharge thorns,Make sure you have fully contacted,Then press the discharge key, LEDLights flashing,Indicates that the product is discharging.
Instructions for users

1)     Although this product is designed to be waterproof,But please try to avoid flooding.So as not to affect the service life of the product.Remote control has no waterproof design,More waterproof.And do not fall randomly,To avoid loose lines.Affect product performance.

2)     This product is vibration MotorType bark stopper.Start,It is difficult for dogs to shake vocal cords,MotorAssociated with stop crying,So you must train more,When it is called, you press the vibration button to punish;When it stops, you can give some food as a reward.,But please don't casually button to play with your pet.This is an inhuman behavior that will affect the training effect..Please remember!

3)     The effective remote control distance of this product is250Rice,Out of range means signal interruption,Unable to work. 

4)     When you do not use this product for a long time,Please take out the battery of the receiver,Remote control switch off.Remove the nylon webbing collar as well,Restore the factory state.

The pet will respond to a call, and the dog will always follow the owner's figure.
Once you have it, you will be handy and your dog's actions will be under control.

Vibration key (high frequency/low frequency) different sounds and states can be freely combined.
It can also be used to train pets to accept instructions from their owners.
Each instruction must have a fixed beat, stick to it and be effective.
The high frequency vibration of the collar can stop the pet's improper behavior.

Confirm that both the remote controller and receiver have installed batteries.
Prepare some snacks for dogs for rewards. This kind of training is more effective.

Note:
After wearing the collar for the first time, some pets will feel uneasy, so don't worry about getting used to it soon.
The whistle sound and low-frequency vibration of the receiver can be used to train pets. Only when a fixed beat is required to train pets can it understand the intention of the owner and persevere effectively.
The high-frequency vibration of the receiver is used to prevent the improper behavior of the pet. Each high-frequency vibration time cannot last too long (within 30 seconds) to avoid overheating damage of the receiver and excessive consumption of battery energy. Call On cannot play with pets with high frequency vibration.

This product is a humane pet training tool. According to the correct usage method, it can train pets safely and effectively without harm.
Sealed waterproof design, remote controller please pay attention to waterproof.